Jump to content
Sign in to follow this  

02' ttr-125 clutch push lever removal???

Recommended Posts

On a 2002 ttr-125 is there a trick to removing the cable push lever after the circlip has been removed?

Looking at the owner's manual it appears the push lever should simply lift out of the crankcase. In my case it does not lift out and feels like it is still being held by something that the manual doesn't cover. :thumbsup:

Share this post


Link to post
Share on other sites

did you take the bolt off the engine. if you take the off and push back on the hook thing on the case it should come right out

Share this post


Link to post
Share on other sites

Where is the bolt? Can it be seen on the side of the engine or do you have to take a crankcase off or something ? :thumbsup:

Share this post


Link to post
Share on other sites
Where is the bolt? Can it be seen on the side of the engine or do you have to take a crankcase off or something ? :thumbsup:

CopyofDSC00284.jpg you cant see it very well but it is visable enough to get the general area

Share this post


Link to post
Share on other sites

same thing with kx 65

take the engine cover off and walla

its comes out its held down by a rod and a bearing to engage the clutch so once u pull it away it comes out can pull up

Share this post


Link to post
Share on other sites

Is that the one that holds the bracket for the clutch cable?

Share this post


Link to post
Share on other sites

Well now i don't know what to do because we already tried that. :thumbsup:

Share this post


Link to post
Share on other sites

It turns out there is a bar that connects to the lever that holds in.

Share this post


Link to post
Share on other sites
It turns out there is a bar that connects to the lever that holds in.
take a pic and upload it..im not getin what your sayin :thumbsup:

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×