Jump to content
Sign in to follow this  

Replacing only intake valves?

Recommended Posts

My intake valves are out of spec but my exhaust ones are still well in spec. Could i only replace the intake valves and not the exhaust? Would i have to use the genuine Honda valves to match the exhaust or could i use ss valves?

Share this post


Link to post
Share on other sites
My intake valves are out of spec but my exhaust ones are still well in spec. Could i only replace the intake valves and not the exhaust? Would i have to use the genuine Honda valves to match the exhaust or could i use ss valves?

yes,that is what i did on my 450,just make sure to have the seats cut and install new springs as well.try the tt oem store for parts or check crotchrocket.com.i would go with the stock parts.if your going with ss i would replace all four because you will need stronger springs.

Share this post


Link to post
Share on other sites

I agree. If you have >50 hours on the machine, I would cut the valve seats, new springs and SS valves for the intakes.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×