Jump to content
Sign in to follow this  

ACERBIS Supermotard front fender

Recommended Posts

:ride: Some where on here I have seen, a fitting guide for the ACERBIS Supermotard front fender i.e hole positions and advice on how to mount it(position etc).

I have gone through the search function but drew a blank :applause:

Can anyone please help ?? :thumbsup:

Many thanks in advance

Share this post


Link to post
Share on other sites

you should have gotten a template sticker its pretty simple. stick it on the mounting point and drill in the spots it says for the drz.

Share this post


Link to post
Share on other sites

For my '06 S i used the holes in the reflector bracket as a template. I then promptly threw that sucker away! :thumbsup:

Later...

Share this post


Link to post
Share on other sites

Cover the holes on the bottom of the triple clamp with a piece of masking tape. Punch out or trace where the holes are, and then transfer the tape to the fender.

:thumbsup:

Share this post


Link to post
Share on other sites

Drill the holes 6.1 mm.

Front holes are on 56 mm centres.

Rear holes are on 56 mm centres.

Front to rear are on 60 mm centres.

The centre line of the front holes is 4.5 mm forward of the centre

of the sprew [sp] "the mark where the plastic is injected".

Neil. :thumbsup::ride::applause:

Fender holes.JPG

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×