CalRMX Posted August 15, 2006 Hi all, I recently picked up a White Bros 43mm Mikuni carb kit for my DR350. Has anybody used this with success? and did they use the standard jetting? Thanks for any help dc Share this post Link to post Share on other sites
johnsand Posted August 15, 2006 I have one but it is bored out to 35mm. But....my head has been opened alot too to equal increased air/fuel. I forget the jetting,, Jessie did it for me when he bored it out. You may contact him http://www.kientech.com/ And the results are GREAT!!!!!! Share this post Link to post Share on other sites
CalRMX Posted August 18, 2006 I have one but it is bored out to 35mm. But....my head has been opened alot too to equal increased air/fuel. I forget the jetting,, Jessie did it for me when he bored it out. You may contact him http://www.kientech.com/ And the results are GREAT!!!!!! Hi John, was it the stock DR350 TM33SS carb bored to 35mm? The carb I have is the Mikuni 2-stroke flatslide carb that White Bros rejetted for the DR350. I've heard varying reports as to whether the carb really worked well. DC Share this post Link to post Share on other sites
