chrisc161076 Posted August 17, 2006 Hi, I've got the takegawa 88cc r stage kit on my sons bike, along with an icat, fmf exhaust and rev box, he races ovals on it. Will a rotor kit work with it, he is seven and still running auto, any other mods without doing the 107cc mod? Also when he pulls off there is a lot of hesitation, any ideas on what this could be? Thanks Share this post Link to post Share on other sites
DC_FIDDY Posted August 17, 2006 This is your best bet! BUY a kitaco rev box. It may sound stupid but I had alot of low end bog. Once I stuck a kitaco rev box on my r-stage it went away. (well there was a tiny bit of fine tuning) The inner will work. The only mod I could think of that would be left is a HD auto clutch! Share this post Link to post Share on other sites
03sik50 Posted August 17, 2006 Is it hesitation like its just sucking air or hesitation like its jumping forward, kinda wanting to go but keeps backing off? (if that makes sense) Try the rev box like DC suggested, play with the fuel screw on the carb. Hows the plug look? Share this post Link to post Share on other sites
Jetster220 Posted August 18, 2006 If your going to get Inner Rotor dont bother with a rev box. But yes, the Inner Rotor will work with that setup quite nicely, much quicerk acceleration and more overrev. Really makes a 88 scream. Share this post Link to post Share on other sites
