Jump to content
Sign in to follow this  

Sensor problem on my new TrailTech speedo

Recommended Posts

Anyone install this before?

Here is the email I sent to trail tech support:

Hello,

I received my brand new Trail Tech speedometer/computer from RockyMountainatv.com and am having one problem:

I've installed my unit, I think I've done so correctly, but I don't register any speed. It seems that the ODO is working , but no speed. the hole I drilled in the caliper is set up exactly as the XR caliper mount is shown in the instructions. However, I've noticed that the magnet screw on my brake rotor, when it passes this sensor is roughly 1/2" away. Is this too far and could that be my problem?

Thanks in advance for any help.

Steve

Share this post


Link to post
Share on other sites

Its too far away. I put mine in a different place, and shimmed it with an old o-ring to keep it from hitting the rotor. It needs to be really close.

Share this post


Link to post
Share on other sites

I appreciate the photo, but I also think I can move the sensor up. Unfortunately, I went strictly by their photo, and didn't realize I'd be 12" from the magnetic bolt. I think I can get it closer. Gonna give that a go tomorrow.

Thanks for the help.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×