kc_450_X Posted August 25, 2006 Quick question for all the pro's here. How hard would it be to install a set of 97 cr80 front forks? What exactly needs to be done and is it worth it for me to get these forks? Oh yeah, this would be going on a 06 crf100 Thanks KC Share this post Link to post Share on other sites
minifig-phil Posted August 27, 2006 It is quite a bit of a job. You'll need to get a new steering stem made and pressed in. Somewhere I have a drawing posted on here Just try to do a search. Share this post Link to post Share on other sites
kc_450_X Posted August 27, 2006 I know a few guys who can make the stem for me, that shouldn't be a problem. Next question, will I need to use spacers after I get the right stem made? Share this post Link to post Share on other sites
minifig-phil Posted August 29, 2006 I lowered the front end 3" when I did mine I had a BBR swing arm which rased the rear a couple of inches. You will notice that the front end is quite a bit heavier than the stock XR front end. Share this post Link to post Share on other sites