Jump to content
Sign in to follow this  

What kind of premix you use?

Recommended Posts

I was wondering what kind of premix you yz250 riders use?? I do not know whats the best. I would like to use one that works well but isnt that expensive. Know any?? :thumbsup:

Share this post


Link to post
Share on other sites

Torco GP-7. :thumbsup: The only stuff I'll use until it gives me a reason otherwise.

It's up to $13.99/qt now.

Share this post


Link to post
Share on other sites

BelRay HR 1 at 32:1. This is what was said about it in one test (which included Amsoil, Mobil 1, BelRay)

"This is the

best looking oil tested to this point with lots of oil throughout the engine

and no carbon buildup. "

Share this post


Link to post
Share on other sites

my brother had a 2005 yz250 built to the hill, he let me race it when he got his 250f, but bakc to you question, he ran klotz premix oil in it at 32:1 with c12 race fuel, it came in a big ble barrel, it was great stuff, i love it, theres jsut something about klotz and that gas, i ran it in my 125 and it made a huge difference, but i dont remember the name of the gas, sorry man, i think it started with a v......i know it was a big buisness.........

Share this post


Link to post
Share on other sites
my brother had a 2005 yz250 built to the hill, he let me race it when he got his 250f, but bakc to you question, he ran klotz premix oil in it at 32:1 with c12 race fuel, it came in a big ble barrel, it was great stuff, i love it, theres jsut something about klotz and that gas, i ran it in my 125 and it made a huge difference, but i dont remember the name of the gas, sorry man, i think it started with a v......i know it was a big buisness.........

VP Race Fuels.

Klotz R-50 here.

Share this post


Link to post
Share on other sites

I run 93 pump mixed 50/50 with VP C12 at 32:1 with Redline oil. The pistons seem to last longer than with any other oil I have used and the power valves are very clean.

Share this post


Link to post
Share on other sites

:applause: Just as satch said, Bel-Ray HR1, price is good and can't beat the protection! I mix 25:1 112octane race fuel with 93 octane pump, then run the oil mixture at 40:1 as it recommends, had a air filter related problem at 14 hrs on the bike and it was still running after 45 mins of powder sand coming into engine, thru filter. cylinder wore out and piston/rings but was still running just noticed slap after a while and thats when i noticed compress low. But oil kept doing its job. :ride: Yamaha took care of that one, no lock up and or rod crank damage,per yamaha. Very happy with it....no....won't use anything else. :applause: Hope I answered your delima. :thumbsup:

2006 YZ250V

2003 YZ450F (parting out)

Share this post


Link to post
Share on other sites

I've tried 5 different brands over the last year.

Yamalube

PJ-1 Gold

Belray MC-1

Maxima 927

Redline

Can't say that I have seen much of a difference with any of them, other than the PJ-1 seemed more smokey. I don't mix them, and try to run very low on the tank before adding a new brand. I run everything at 32:1.

This is one of those questions you will get one thousand different answers on. Everyone seems to have their own opinions.

Share this post


Link to post
Share on other sites

Motul 800 @ ~ 48:1 with racing fuel. I have do this for my tricked out RZ350, but run it in my 01 YZ285 also. I even ran it in my smoker Lawn Boy mower till the throttle linkage messed up at the carb. Backpack blower and weed eater also get the good stuff. Never foul plugs and piston wear is good not to mention carbon buildup is good.

Craigus

Share this post


Link to post
Share on other sites

Most any name brand oil will give you more than ample lubrication. I prefer Maxima 927 or SuperM. :thumbsup:

Share this post


Link to post
Share on other sites

Yamalube 2R 32:1 with BP 93 octane

Stock jetting except for #48 pilot (in place of #50)

Share this post


Link to post
Share on other sites

i ride a yz 85 and i was using yamalube it didnt run bad. but then i used belray and it ran horible! :ride: worst oil ive ever had. but now i run torco GP-7 and its exelent :thumbsup: go for the torco man

Share this post


Link to post
Share on other sites

I used to use Yamalube when I first bought my YZinger but now I use Maxima. It is a little cheaper and I have had my bike for 4 years now and have not had any issues with clog power valves. Of course that is just my .02

Share this post


Link to post
Share on other sites

I used to use Klotz Super Techniplate which was awesome stuff...But no shops around here carry it regulary...I use Motul 710 now in my bike...I have a 125 but a 2 smoke is a 2 smoke.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×