Jump to content
Sign in to follow this  

HELP! FCR-MX disaster!!

Recommended Posts

I don't know what I did wrong, but I did it good. I took my fcr-mx apart to check the needle clip position. I took the top cover off, and rotated the slide actuator to remove the slide from the carb. Apparently you shouldn't do that because now when I put the slide back in it will not close completely. I'm bummed and stumped, not to mention stranded. Please help me out!!

Thanks in advance!

Share this post


Link to post
Share on other sites

naw, I screwed up the ap cam linkage; got it overcenter. Had to tear the actuator shaft out to get it all right. Could've used 2 more hands to hold all the springs and things, but I got it. Thanks for your input; it's nice to know help is always out there!

Share this post


Link to post
Share on other sites

Note that needle adjustment does not require slide removal.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×