Jump to content
Sign in to follow this  

Stator testing - ????

Recommended Posts

I was hoping someone had the resistance figures for the stator on a 1975 XR75. I've got the bike back home after the charade at the Honda shop (see earlier post), and I've got a friend's multimeter/ohmmeter, so I was going to take a stab at it to see if the stator needs rewound or is just plain bad.

Also, what wires should I hook up the ohhmeter to in order to get an accurate reading? How do I know what's "acceptable" and what isn't, in terms of resistance?

Thanks.

:thumbsup:

Share this post


Link to post
Share on other sites

In my Clymer manual, It states that Honda does not provide Stator coil resistance specifications for the XR75. Although, the xr80/100's are 0.576-0.704 ohm. This should be close enough. Any lower, get a new stator. Any higher clean your breaker points. Flywheel needs to be at F. Use the black/white wire and a ground.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×