Jump to content
Sign in to follow this  

CRF450R triple clamp on my SM?

Recommended Posts

My buddy gave me his old(few months) applied upper triple clamp with risers for fat bars. Will these bolt up to my 06 DRZ400SM?

Share this post


Link to post
Share on other sites

measure the outside diameter(OD) of the upper fork tube(e.g. 46mm). measure the inside(ID) of the top triple clamp. and if they match you should be fine.

--keith

Share this post


Link to post
Share on other sites

most likely it will not fit; the crf and drz frames are very different..... but you can try.

good luck..

Share this post


Link to post
Share on other sites

the offset of the steerer tube is needing to be matched up between the top and bottom triple clamp. if you can score the right offset clamp as your bottom one, you should be fine. otherwise you won't be able to install the top clamp.

--keith

Share this post


Link to post
Share on other sites

Thanks. I will measure it tommorow and see. If it doesn't fit I will just use the risers.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×