Jump to content
Sign in to follow this  

Lightspeed carbon fiber case saver....

Recommended Posts

Has anyone tried this product and if so, can you give me some feedback as the the quality and mounting method, etc.?

Share this post


Link to post
Share on other sites

There great there's nothing worse than a all scratched and beat up iginition cover, basically they mount at the same points as your ignition cover do like over the top as a skin.

You have to be careful when tightening them up since if you do it un-evenly you can crack the carbon. Try to do it like you would torque something down and then gradually get tigher on each bolt. Quailty is geat, if you want to refresh it up just repsray it with clear coat. Other wise silicone spray after a wash keeps it looking great.

Share this post


Link to post
Share on other sites
There great there's nothing worse than a all scratched and beat up iginition cover, basically they mount at the same points as your ignition cover do like over the top as a skin.

You have to be careful when tightening them up since if you do it un-evenly you can crack the carbon. Try to do it like you would torque something down and then gradually get tigher on each bolt. Quailty is geat, if you want to refresh it up just repsray it with clear coat. Other wise silicone spray after a wash keeps it looking great.

Hmmm...thanks for the info but I was talking more about the skid plate/case saver piece.

Here: http://crfsonly.com/catalog/product_info.php/cPath/25_44/products_id/318

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×