Anyone making Hubs yet??

[5150_clothing_designs]

does anyone know if anyone is making hubs yet for this bike i want to keep my dirt set up but need to make a supermoto wheel set also

[Tiki]

Isnt it just a 28 spoke hub?

[5150_clothing_designs]

front 28 rear 32 i do not want to use my stock ones because i want to keep the dirt set up also

[aedwards07]

Try Rad Mfg.I talked to them a while ago and they said they should have something soon.I bet they are done by now.

[Smartt Yamaha127]

I am not sure, but wont the cr85's fit. 99 % sure. 1 % not.

[procycles]

CR 85 hubs are not even close. Entirely different. Why not just order some from Honda. They make them. Why wait for some aftermarket company to make something less than the stock ones?

[5150_clothing_designs]

CR 85 hubs are not even close. Entirely different. Why not just order some from Honda. They make them. Why wait for some aftermarket company to make something less than the stock ones?

no Honda dealer that i know of has part numbers yet for any stock CRF 150R parts

[socalxr]

A hub is a hub. My friend already has two sets of supermoto wheels for his 150's and out at Grange, there was about 10 150's doing super-moto. I'm pretty sure he is using CR85 hubs with different bearings and spacers. You can also use a CRF250 or 450 hub. Use just need spacers and bearings. This way, you can easily get a bigger full floating disc. You just need to machine a bracket for the caliper. We had a cr85/200 conversion with a a 450 set-up. It was quit easy to do. It's pretty much the same with the 150r, but the axles are bigger. But, either was bearing with different id's will take care of that. The bearings are available at any bearing shop.

[cruban]

I just picked up 2 hubs from my local honda dealer, no problem

[5150_clothing_designs]

just ordered my 07 stock hubs from Berts today

[CHILL]

What did a new set of stock hubs cost? Where did you get them from?

[e-skizzle]

Check Out Factory Pro Racing.....they utilize OEM bearings