Oil port on head leeking. Help

[moham]

I put the new piston kit in and have a leek out of the small port on the exhaust side of the head. Could I have done the rings wrong? What does that port do? Other than that, no smoke, and it didn't start spewing until after break-in always Stats first kick ? c-mon Underdog, you Know

[155]

not alot of tech help in this forum ive noticed ,but I would say download the free service manual and make sure evrything is right!

[moham]

The dimple in the head goes straight through the valve body and into the spark plug cylinder. This little port was blowing out oil because of the ring gasket around the plug cylinder was leaking. Thanks anyway

[Thumper38]

I am not sure but I think that weep hole is for drainage if water or any liquid gets around the spark plug cap. If I am correct then it sounds like the vale cover gasket is leaking, pull the the plug wire and look in with a flash light to see if there is any oil around the plug. Hope this helps