Its White

almostinvincible119 · October 12, 2006

I figured that I would let everyone know that the white kit is well worth the money. It looks so sick and I even opted out of putting some of the trim graphics on like the airbox and front fork logos.

http://i114.photobucket.com/albums/n260/almostinvincible119/DSC01681.jpg

http://i114.photobucket.com/albums/n260/almostinvincible119/DSC01672.jpg

DPW · October 12, 2006

Looks good! That is what they should have done for the '07 SE

Bigcr · October 12, 2006

Wow! That's sick dude.

grayracer513 · October 12, 2006

That's what I'm doing to my next one, right there.

Chrome Speedo · October 12, 2006

Very nice. Do those kits come with the graphics applied to the plastic? Somehow I think I know the answer already.

Troutman · October 12, 2006

Wow!!! That looks sick. However, your chain is way to tight, I wouldn't want you to hurt the hub or tranny on that beautiful masterpiece! Great looking bike.

almostinvincible119 · October 12, 2006

Thanks troutman, but its got 3 fingers width from the chain slider and chain. And my fingers are avg size, they arent HUGE, but I'll def check that tommorow.

hi everybody · October 12, 2006

are those the henry replica graphics? that thing looks soooooo damn shweet...

barch88 · October 12, 2006

Hot, very sick.

Troutman · October 12, 2006

Thanks troutman, but its got 3 fingers width from the chain slider and chain. And my fingers are avg size, they arent HUGE, but I'll def check that tommorow.

Sorry! I guess it only appears that way. I always think mine is loose but whenever I measure it its always right at 2" from the rear chain slider bolt to the chain on the stand like the manual specs. When its in spec it has quite a noticeable bow from the front to the rear sprocket. All of my previous bikes had a shorter spec and its taking a little getting used to. Anyway love the new look

PS: What bend did you go with on your bars I am 6-4 and am looking for a little more room. I have 8mm risers now but i think I could use a little more room and yours look taller.

cappy79 · October 12, 2006

Your bike looks awesome. European and Canadian Yammies used to come that way!

http://i107.photobucket.com/albums/m314/drmwvr79/OW13_1t.jpg

Cappy79

NDC · October 12, 2006

Make sure to take lots of pics. I have the same kit, and after a few rides, your knees will embed the dirt into the shrouds, permanantly.

I've tried every cleaner I can think of, and it won't come out!

almostinvincible119 · October 12, 2006

Troutman, I have the Reed/Henry bends on it right now, I jumped on that bandwagon and seemed to like it. I took a really hard digger Sunday and I bent them, so I corner better left than right. Ive got some Sunline AV One's on the way. I think that for your height, you might better from the Windham bend. Also, another question, is there anyway to rubbermount the stock clamps? NDC....brillo pads. They scratch up your graphics just a tad, but they get that brown out. Also, for the plastic scratches that have dirt embedded in them, use 2000-3000 grit sandpaper with lots of water. Works WONDERS!

RORY DONOVAN · October 12, 2006

does anyone make a white plastic kit for an 05' or will the 07' plastic fit an 05'?

Ga426owner · October 12, 2006

Make sure to take lots of pics. I have the same kit, and after a few rides, your knees will embed the dirt into the shrouds, permanantly.
I've tried every cleaner I can think of, and it won't come out!

Can you cut clear and put over the new graphics when new? This is my concern too...Red Clay here in the SE will destroy the white Graphics but I think I am going to order them anyway

almostinvincible119 · October 12, 2006

Im sure you can use the clear covers that FX sells. Check Rocky Mountain or Parts Unlimited. I ride this Georgia clay and clay down here in north Florida...it doesnt really concern me. Its a dirt bike, not a harley...just wash it and change the oil. Yamahas run forever, but they cant look great forever

arel451 · October 13, 2006

I figured that I would let everyone know that the white kit is well worth the money. It looks so sick and I even opted out of putting some of the trim graphics on like the airbox and front fork logos.
http://i114.photobucket.com/albums/n260/almostinvincible119/DSC01681.jpg

http://i114.photobucket.com/albums/n260/almostinvincible119/DSC01672.jpg

I don't care what anyone says, thats hot!

NOMADAK · October 13, 2006

does anyone make a white plastic kit for an 05' or will the 07' plastic fit an 05'?

In 2006, Yamaha went with a different gas tank and shroud combo. The graphics don't touch the gas tank. THANK GOD! The '07 has the same type design.

The front and rear fenders would maybe fit an '05 though.

yamahacrazy_310 · October 13, 2006

SEXY!!!!!!!

grayracer513 · October 13, 2006

Nope, not the rear fender. But try UFO or Polisport for white plastics. Seems to me one of the two makes them.

Sign In

Its White

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Create an account or sign in to comment

Reply with:

ThumperTalk