Jump to content

07 RMZ 450 rear fender


Recommended Posts

Could be the reason, but doubtful. I've never lifted mine that way and it was crooked from day one!

+1 same here

My guess is that something, when packing these up in the crate, was hitting the fender and bending it down on one side and it took a 'set' in that position after being in the crate for a while.

Link to comment
Share on other sites

Yes, I have a 2005 RM-Z 450 and my fender is crooked. What I found is when I remove the subframe during servicing, when I re-install the subframe the fender is straight. Then usually a half hour or so into the next ride the fender is crooked again. I figure the sub frame is settling a bit. Weird.....

Rob

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...