I just changed out the shift stopper lever on my 06 yz 125 for the 07 model stopper. I pulled the clutch out to get to it and put the clutch back in. Now the clutch is dragging very badly. When in neutral it is fine. In gear with the clutch pulled in it is not disengaging at all. I did remove the disks from the basket but left them in a stack so they did not get out of order. I did not see any grooves in the basket like some talk about in past threads. I need some advise for when I pull it back apart. It sounds and feels like it should be working. Could the cable need to be adjusted even though I did nothing to the clutch other than pull it out and put it back in? Put new oil in also.