Jump to content
Sign in to follow this  

Skid Plate?

Recommended Posts

There is a Yamaha shop in Las Vegas that has the best looking skid plate for yz/wr's that i have seen. Its made out of aluminum and covers both the water pump and the ignition side perfectly. I forget the name of the shop cost was around $100 bucks. Saw it for the first time on the starting line at the races last Sunday. Hopefully someone will come up with the name to the shop I would like to get one also.

huge

Share this post


Link to post
Share on other sites

I have a Moose Skid plate on my 1999 WR. It works great and looks good too. They go for $78.99 and they are in the Tucker Rocky cataloge. You are making a very wise choice by going to full coverage. I found out the hard way. Rock to the ignition cover, then no oil, then cam welded to the head. Big bucks! for $78.99 it is worth the peice of mind.

Share this post


Link to post
Share on other sites
Originally posted by Buck:

I have a Moose Skid plate on my 1999 WR. It works great and looks good too. They go for $78.99 and they are in the Tucker Rocky cataloge. You are making a very wise choice by going to full coverage. I found out the hard way. Rock to the ignition cover, then no oil, then cam welded to the head. Big bucks! for $78.99 it is worth the peice of mind.

Thanks I ordered the Moose skid plate from Baja Designs. They said it bolts to the same places as the old glide plate "usually". How did yours go on?

Share this post


Link to post
Share on other sites

There are three bolts that hold it on. The bolt in the back nearest the oil drain on the motor uses the stock mounting point and then it mounts to the down tubes in the front using clamps that come with skid plate. It only takes about five minutes to install.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×