Jump to content
Sign in to follow this  

Difficulty setting rear sag

Recommended Posts

I have an 07 YZ250F. I attempted to set the rear sag at 3 inches but I couldn't get it below 3 1/2 inches. I then realized that the mono has a chrome ring on the middle of the thread length, under the spring. You can only tighten the spanner nut to that point. I think that the inner chrome ring is threaded and could be raised or lowered but I'm afraid to try. I don't know if it is recomended to move it to allow further adjustment.

I'm only 175 pounds I find it hard to beleave that the stock spring cannot be adjusted to properly accomodate my weight.

The owners manual does not address this issue.

Looking for some experienced advice.

Share this post


Link to post
Share on other sites

Not sure why you'd want 3" of sag. You should probably want something close to 4" sag and 1" free sag. Given your weight that should be obtainable :applause: Nice bike, btw.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×