Jump to content
Sign in to follow this  

Yosh TRS Ti - open can (repack) pics

Recommended Posts

one of the rivets on my can broke so i decided to fix it, I didn't repacked my can cause it has only 2.5k km but this walk though can be used for that as well. i use a lot of pics cause it's easer for me than to describe it in english cause my english suck...

+++++++++++++++++++++++++++++++++++++++++++++++++++++

disassemble

+++++++++++++++++++++++++++++++++++++++++++++++++++++

my broken rivet

attachment.php?attachmentid=2594&stc=1&d=1172407909

remove can end

attachment.php?attachmentid=2595&stc=1&d=1172407909

attachment.php?attachmentid=2596&stc=1&d=1172407909

mark a 4mm drill with 10mm mark

attachment.php?attachmentid=2597&stc=1&d=1172407909

drill all the rivets of the rear of the can only and remove the metal strip

attachment.php?attachmentid=2598&stc=1&d=1172407909

attachment.php?attachmentid=2599&stc=1&d=1172408172

hit the remaining rivets parts using a steel nail just to disconnect it from its shell

attachment.php?attachmentid=2601&stc=1&d=1172408230

using a plastic hammer remove the end cap from the muffler

attachment.php?attachmentid=2602&stc=1&d=1172408230

attachment.php?attachmentid=2603&stc=1&d=1172408314

hit the remain rivets parts using a steel nail out

attachment.php?attachmentid=2604&stc=1&d=1172408448

attachment.php?attachmentid=2605&stc=1&d=1172408448

+++++++++++++++++++++++++++++++++++++++++++++++++++++

assemble

+++++++++++++++++++++++++++++++++++++++++++++++++++++

add the end cap on the muffler and using a plastic hammer hit it back in

attachment.php?attachmentid=2606&stc=1&d=1172408504

attachment.php?attachmentid=2607&stc=1&d=1172408504

using a rivet gun connect the metal strip & end can to the can back on

attachment.php?attachmentid=2609&stc=1&d=1172408718

attachment.php?attachmentid=2611&stc=1&d=1172408718

end result

attachment.php?attachmentid=2612&stc=1&d=1172408718

broken.JPG

remove1.JPG

remove2.JPG

mark10mm.JPG

drill.JPG

drillpout.JPG

remove strip.JPG

nail.JPG

hammer.JPG

endcap.JPG

rivetsout.JPG

rivetsout2.JPG

endcap2.JPG

back1.JPG

back2.JPG

rivets1.JPG

rivets2.JPG

rivets3.JPG

endR1.JPG

Share this post


Link to post
Share on other sites

Nice write up!:applause:

I've done this myself, and its suprisingly easy.

Its just having the tools!:applause::lol:

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×