power bomb to yoshi slip on?

[Tim mx]

hi guys need to know if a fmf power bomb will bolt up to a yoshi rs3 slip on? without any modifications or things needing to be made up etc etc.

cheers in advance:ride:

[Neil Claydon]

hi guys need to know if a fmf power bomb will bolt up to a yoshi rs3 slip on? without any modifications or things needing to be made up etc etc.

cheers in advance:ride:

If the slip on is for an E, yes.

The FMF is 41 mm O/D.

If the slip on is designed for an S and uses the S gasket, no, or yes if you make a gasket.

Neil. :applause:?

[Tim mx]

is it an easy job to make a gasket mate?.....

[Neil Claydon]

is it an easy job to make a gasket mate?.....

Depends on how much slack you have to take up

I used thin alloy sheet (a camping stove wind break) to start with, and a layer of "Hylomar Blue" as a sealer.

Worked Ok, but after a couple of thousand miles it started to blow, so I turned one from alloy tube.

It is a very simple job, if you have a lathe, or know somebody who has the use of one.

If you have to pay a local engineer to make one, I suppose about £20.00

Neil. ??