Jump to content
Sign in to follow this  

ttr125 brass plug

Recommended Posts

Is the brass plug on the carb of a 06 ttr125 that needs to be drilled out to gain access to the fuel mixture screw on the right side of the bike (kick starter side) The only adj screw the manual shows is on the left and it's listed as the throttle stop screw. I started to drill what I thought was the plug on the right side of the bike, but stopped short as I thought it seemed very deep.

Share this post


Link to post
Share on other sites

After switching the main and the pilot I assume it's on the bottom of the carb that runs next to the fuel bowl?

Share this post


Link to post
Share on other sites

From what I remember, it is on the bottom side of the carb, in the center and on the engine side. It is in front of the fuel bowl.

Share this post


Link to post
Share on other sites

From another thread:

05-06_bikes_fuel-screw.jpg

See if this helps...

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×