Jump to content
Sign in to follow this  

Knurling, Portland/Vanc. or close

Recommended Posts

Looking for a machine shop that does Knurling. For pressing in undersized stem in a T-clamp.

If you know of any or had this service done could you point me in their direction.

ThanX in advance.

.

Share this post


Link to post
Share on other sites

Knurling is usually done on an outside surface, in this case, the stem. Any reputable machine shop should be able to do it for you.

What is the difference in diameters?

Ride on

Brewster

Share this post


Link to post
Share on other sites
Knurling is usually done on an outside surface, in this case, the stem. Any reputable machine shop should be able to do it for you.

What is the difference in diameters?

Ride on

Brewster

Your correct, I guess I should read what I type. Took care of it.:applause:

Share this post


Link to post
Share on other sites
What is the difference in diameters?

Ride on

Brewster

Actually I don't know yet until I receive my parts later in the week. I might not have to have the knurling done but, in case I do I'll be look'n for a shop. I was kinda hope'n someone might recommend in the mean time rather than shop'n around.

.

Share this post


Link to post
Share on other sites
Try Charlie Brown, at Superior Sleeve, in Clackamas OR. He races at our local vintage mx races, & knows a lot about biking/machining needs......

http://www.superiorsleeve.com/

Good one!:applause:

Thanks, I've been to Charlie's before and he's 20 min's from me.

.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×