Jump to content
Sign in to follow this  

James Dean jet kit

Recommended Posts

Help please!

I got my DRZ E model with the FMF pipe, and I have no idea on jetting.

I expect my Yoshi RS3 full SS system to arrive tomorrow, and was wondering if the James Dean jet kit would eliminate all trial and error from getting the correct set up, and eliminate the need for dyno'ing

I am at Sea level in the UK.

All advice appreciated:thumbsup:

Also if this is the way to go, what needle settings etc. are recommended?

Share this post


Link to post
Share on other sites

i'm not sure on what settings you will need.what carb is on the bike(i'm sure its a fcr but the 07's in the US don't come with that carb anymore.if you go to the jetting forum i'm sure eddie will have the right specs for you

Share this post


Link to post
Share on other sites
i'm not sure on what settings you will need.what carb is on the bike(i'm sure its a fcr but the 07's in the US don't come with that carb anymore.if you go to the jetting forum i'm sure eddie will have the right specs for you

Its a fcr on a 2002 E model.

Share this post


Link to post
Share on other sites

Hey I have an '01',.kicker,I went with the yosh full system,and the JD kit, pulled out the rubber plug in the air box and followed the directions for altitude that came with the JD kit and the bike rips,.pretty staight forward instructions come with the kit,.I'm happy with it,.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×