Jump to content
Sign in to follow this  

07 RMZ 450 clicker settings

Recommended Posts

Having a few issues with my 07 RMZ450.

I have set the sag at 100mm, I weigh 80kg(160????) stock clicker settings are bit soft for full moto but, as I stiffen the the compression it starts to push slightly in the front and wont settle into the flat turns as well & the rear has started to kick a little bit too much.

Presently running 4clicks out on the fork compression, and rear high speed 8 out from hardest and low speed half a turn harder from stock, (1.5 truns out from full hard I think).

Re valve on the cards, no break in racing for few more weeks

Share this post


Link to post
Share on other sites

80kg is 176lb, you have the rear clickers description wrong, you are 8 out on compression low speed and half a turn out on the high speed, it sounds like you need a revalve if your clickers are 4 out on the forks, you could try 10wt oil in the outer chambers for better bottoming control(set at same oil amount as std) i would think the springs are very close for your weight.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×