Jump to content
Sign in to follow this  

Jetting ?? DRZ400s with aftermarket Keihin 39mm

Recommended Posts

'06 DRZ400s....1,000 ft., Yosh RS3 full exhaust, CR 39mm flat slide carb, 3x3 with additional air vents,Winter temp.-65 summer-105...sent the carb off to ZIP-TY RACING to have their $100 doller carb mod done to it...Im not sure what the jetting was before I sent it in, but I would like to know what it should be so I can order the correct jets, needle, ect. and install them if need be before I put the carb back on the bike.

Share this post


Link to post
Share on other sites

160 main jet

200 main air jet

emn needle

clip 3

45 pilot jet

pilot air jet removed

2 turns fuel screw

Share this post


Link to post
Share on other sites

Thank's Eddie...I'l be getting the carb back this week and I'll post the results after the weekend most likely.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×