Jetting ?? DRZ400s with aftermarket Keihin 39mm

[drz400boy]

'06 DRZ400s....1,000 ft., Yosh RS3 full exhaust, CR 39mm flat slide carb, 3x3 with additional air vents,Winter temp.-65 summer-105...sent the carb off to ZIP-TY RACING to have their $100 doller carb mod done to it...Im not sure what the jetting was before I sent it in, but I would like to know what it should be so I can order the correct jets, needle, ect. and install them if need be before I put the carb back on the bike.

[Wayward Son]

im pretty sure part of the $100 is them jetting.

please post what they used.

[drz400boy]

They told me that they do not do jetting on the carb!!

[Wayward Son]

well,ok.

what version of the fcr?where did it come from?

[drz400boy]

Sudco

[drz400boy]

016-798 is the part number on the Keihin box...not sure what version...

[Wayward Son]

160 main jet

200 main air jet

emn needle

clip 3

45 pilot jet

pilot air jet removed

2 turns fuel screw

[drz400boy]

Thank's Eddie...I'l be getting the carb back this week and I'll post the results after the weekend most likely.