Jump to content
Sign in to follow this  

Jetting my 110

Recommended Posts

I cannot get my KLX 110 to stop popping after I have been on the throttle and then let off. I have a Two Bros. pipe and air filter. I am running an 85 main jet but everything else is stock. I even replaced the crush washer on make sure there wasn't an exhaust leak.

Does anyone have a suggestion?

It's driving me crazy.

Share this post


Link to post
Share on other sites

Try to go up one size on your pilot jet. Stock is a 38 so,I think your are looking for a 40. If you have very small drills, you can drill it out to .40mm, by hand. I only say to drill it because, those pilots can sometimes be hard to find. My friends and I have been drilling stock jets for a couple of years and they have worked great. I'm currently up to a 110 on my main, because of extensive mods done to the bike.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×