Jump to content
Sign in to follow this  

kdx 220 help, burned

Recommended Posts

Eddie, just picked up clean 02 kdx 220 for my son, need some jetting advice, motor stock, will pull airbox lid today, pro circuit platinum (not platinum 2), and pro circuit silencer, previuos owner said after market reed but didnt know brand. We ride Idaho, minimum 2500 ft up to 7000, higher on occasion, need a starting point with airbox open, (bike sold new in Canada), thanks in advance, Dean

Share this post


Link to post
Share on other sites

I used to have a '01 KDX 220. with the air box lid removed, not sure on pilot jet and main jet, I know that the CEL needle is the ticket in that bike. My carb was modified by RB Designs down in Oregon. He bored it out to a 36mm and put a divider plate in it on the exit side of the carb. I think it gave it more low end and better throttle response IMO. Hope that helps some.

Little Jeff

Share this post


Link to post
Share on other sites

thanks little jeff, all info helpfull, I need to stick with the stock carb for now, a kdx riders info page gave me a place to start.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...