Jump to content
Sign in to follow this  

what should supermoto sag be on a WR426??

Recommended Posts

what should the sag be set at on a stock suspention 2001 WR426 for street use? front and rear sag? and if you could help me with a good starting point for the clickers that would be great also! ive searched and searched but havent found what i needed to know exactly so i thought i would ask.

Share this post


Link to post
Share on other sites

has nobody ever set one up themselves? i just need some baseline numbers if anybody could help me out.

Share this post


Link to post
Share on other sites

Most shop still recomend around 100mm, but it's all a compromise. The more pavement there is the less sag you can use. Using less sag will help keep the chassis flatter on the pavement but will have less traction in the dirt. I've used anything from 100 to 75mm depending on how much dirt there is.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×