Jump to content
Sign in to follow this  

specific jd jetting question

Recommended Posts

after reading every thread on jetting, ive decided the jd s005 is the kit to get for an 07 s with 3x3 mod. im wondering if the instructions include the correct jet and clip position based on temp and elevation. ill be running between 4000 and 9000 feet up in tahoe. does anyone have experince and input as to the proper settings at this elevation with stock pipe. any suggestions are appreciated

Share this post


Link to post
Share on other sites

Having just installed the kit (although badly) I can tell you that the kit does come with instructions on main jet and needle clip position based on altitude etc.

Share this post


Link to post
Share on other sites
after reading every thread on jetting, ive decided the jd s005 is the kit to get for an 07 s with 3x3 mod. im wondering if the instructions include the correct jet and clip position based on temp and elevation. ill be running between 4000 and 9000 feet up in tahoe. does anyone have experince and input as to the proper settings at this elevation with stock pipe. any suggestions are appreciated

150 main jet

blue needle

clip 3

stock 22.5 pilot jet

2.75 turns fuel screw

Share this post


Link to post
Share on other sites

thanks eddie was hoping to hear from you thats exactly what ill do. much appreciated

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×