Jump to content
Sign in to follow this  

Will an xr80 wheel work on a xr100.

Recommended Posts

More specifically I am wondering if a 1994 xr80 rear wheel will work on a 2000 xr100. Let me know.

Thanks

Go to Service Honda and check the part numbers for each. Compare.

I would guess the spacers might be different at least.

Share this post


Link to post
Share on other sites

I'll assume that the 80 has a 14 inch wheel and the 100 has a 16 in. But they call for the same bearings, spacers and such so they should swap out. But will change the gear ratio/top speed.

Share this post


Link to post
Share on other sites

My guess will be that the wheel would fit the 100 axle but i know for sure that the 80 uses a #420 chain & the 100 uses a #428. My point is that you will need to make sure that the rear sprockets will interchange between the 2 different wheels.

Share this post


Link to post
Share on other sites

No more power, just a smaller wheel. You will need to put your sprocket from the 100 on there or change the chain and front sprocket.

Share this post


Link to post
Share on other sites

A smaller wheel will definitely add low end power, but it will take away top speed. Its the same as getting a bigger rear sprocket.

Thanks

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×