grand opening!

just thought id throw this out to you guys.

our grand opening is tommorow,sat 7/14.

feel free and come buy and at least have a burger/dog.

i will be doing free dyno runs as well.bikini bike wash i think,vintage bike show.

just a bunch of stuff.

OTD CycleSports

7010 e colfax ave

denver co 80220

we will open 9-8.

come by and say hi!

Oh man do I wish I lived in Co!!!!

1080 miles and 15 hours, 41 minutes.

It would be nice, but I'll have to take a rain check.

OTD's a great outfit. :thumbsup: I bought my '07 400s in Auburn Ca in May. Any Grand Opening "specials" you can extend to your long distance TT buddys?:thumbsup:

I'm leaving now.

Wait for me.:thumbsup:

Even if i left now i wouldnt make it there before you closed :-(

Eddie, I hope it's not you in the bikini for the bike wash :thumbsup:



Eddie, I hope it's not you in the bikini for the bike wash :thumbsup:



Makes 2 of us....

Good luck and congratulations.

Oh man do I wish I lived in Co!!!!

At least you live within range :cheers::bonk:

Neil. :thumbsup: :thumbsup: :busted:

At least you live within range :cheers::bonk:

Neil. :thumbsup: :thumbsup: :busted:

I guess if you can call 1270 miles "within range":D


I'll be riding up there for sure!

maybe I should get my bike dirty first!:thumbsup:

Congrats and all the best in your new venture


I'll be there!

OK, maybe not. But congrats on the opening! :thumbsup:

Oh man do I wish I lived in Co!!!!

me too:thumbsdn:

couple of pics of the bikini bike wash for us guys who can't make it couldn't hurt:ride:

best of luck!

couple of pics of the bikini bike wash for us guys who can't make it couldn't hurt:ride:

best of luck!

I went to one in Utah with a friend on his Harley ( a bit of a poser). There were some really hot chicks washing the bikes. Anyway, it was a hot day and my friend refuses to get off his bike... kept telling the girls you can wash it with me on it. So one of the girls takes a hose with a lot of pressure and fires it right at his groin... never seen anyone move off his bike as fast as he did.

I about died laughing.

I live in California and just happen to visiting some friends out in Denver that just happen to live just down the street from the shop. How lucky am I. I will be sure to stop by and introduce myself and thank you for all the answers to my questions that I have answered via the "Search Function". I'm trying to do my part to keep your PM box free from searchable items. See you and the ladies tomorrow!

Eddie....................I'll be there :cheers:

Maybe not today, but I will be there (sometime)

Congrats on the new business,:thumbsup: we can't wait for the new web-site so we can hang out there at the wee hours of the morning. I hope you have enough bandwidth to carry all of us:bonk:

HappyRiding !!


I guess if you can call 1270 miles "within range":D

At least you don't have the Atlentic Ocean in the way :cheers:

Anyway, 1270 miles at a 60 mph average is only 21 (and a bit) hours.

Not sure what your problem is :bonk:

Neil. :thumbsup: :thumbsup: :busted:

1: Start out going NORTHWEST on STEINHELMER RD / STEINHILBER toward FOX HOLLOW RUN. 1.2 miles Map


3: Turn RIGHT onto US-11. 0.3 miles Map

4: Turn LEFT onto CR-46 / LERAY ST. Continue to follow CR-46. 0.7 miles Map

5: Turn RIGHT onto FACTORY ST / CR-46. Continue to follow CR-46. 2.0 miles Map

6: Stay STRAIGHT to go onto CR-18 / DUTCH SETTLEMENT RD. 2.8 miles Map

7: Turn RIGHT onto NY-37. 3.7 miles Map

8: Turn LEFT onto NY-411. 2.9 miles Map

9: Merge onto I-81 N (Portions toll) (Crossing into *CANADA* ONTARIO). 14.3 miles Map

10: I-81 N becomes PROVINCIAL ROUTE 137 N (Portions toll). 2.4 miles Map

11: Take the HWY-401 W ramp toward KINGSTON / TORONTO. 0.9 miles Map

12: Merge onto PROVINCIAL ROUTE 401 W. 161.8 miles Map

13: Keep LEFT to take HWY-401 EXPRESS W. 34.5 miles Map

14: HWY-401 EXPRESS W becomes PROVINCIAL ROUTE 401 W. 99.0 miles Map

15: Take the HWY-402 W exit toward SARNIA. 0.5 miles Map

16: Merge onto PROVINCIAL ROUTE 402 W (Portions toll) (Crossing into *UNITED STATES* MICHIGAN). 63.7 miles Map

17: PROVINCIAL ROUTE 402 W becomes I-69 W (Portions toll). 129.6 miles Map

18: Merge onto I-69 S via EXIT 97 toward FT WAYNE. 34.3 miles Map

19: Merge onto I-94 W via EXIT 38 toward CHICAGO (Passing through INDIANA- then crossing into ILLINOIS). 156.6 miles Map

20: Merge onto I-80 W via the exit on the LEFT toward WISCONSIN / IOWA (Portions toll). 150.7 miles Map

21: Merge onto I-280 W (Crossing into IOWA). 26.6 miles Map

22: Merge onto I-80 W via the exit on the LEFT toward DES MOINES (Crossing into NEBRASKA). 641.4 miles Map

23: Keep LEFT to take I-76 S via EXIT 102 toward DENVER (Crossing into COLORADO). 177.0 miles Map

24: Merge onto US-6 W / US-85 S via EXIT 9 toward COMMERCE CITY. 3.7 miles Map

25: Merge onto I-270 E / US-36 E toward LIMON. 2.5 miles Map

26: Take the CO-35 S / QUEBEC ST / SAND CREEK SOUTH DRIVE exit- EXIT 4- toward STAPLETON AIRPORT. 0.2 miles Map

27: Turn LEFT onto QUEBEC ST / CO-35 S. Continue to follow QUEBEC ST. 2.9 miles Map

28: Turn RIGHT onto E COLFAX AVE / I-70 BL W / US-287 W / US-40 W. 0.1 miles Map

29: Make a U-TURN at OLIVE ST onto E COLFAX AVE / I-70 BL E / US-287 E / US-40 E. <0.1 miles Map

30: End at 7010 E Colfax Ave

Denver, CO 80220-1804, US Map

Total Est. Time: 26 hours, 9 minutes Total Est. Distance: 1717.80 miles

ill be there in no time.......what time do you close again

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By BikeChimp
      I'd like to turn my UK 2004 DRZ400S back to stock airbox (snorkel) and jets, needle shim position etc
      When I bought it the PO had fitted a Sigma6 kit and done the 3x3 mod but is doesn't have a tapered needle like the JD and other kits. Took me ages to get it running right, however it still runs rich and I'm fed up of arsing around with it. 
      So I've bought a standard airbox without 3x3 hole, stock exhaust.
      Q1 The Suzuki manual says this Mukuni BSR36 (29FA) carb should have a 142.5 Main Jet but the Clymer manual say its a 135.  In UK everything's from sea level to 1000m. I'm in Sheffield so nothing gets above 500m even in the Peaks (Hills). Any UK owners or anyone else know what the correct jet should be?
      Q2 Says the original needle is a '5DH36-2nd'. The needle has 5 notches on it. Currently set at 2 clip from bottom. The Suzuki reference says needle is 5DH36-2nd, Does the 2nd bit mean 2nd from top or bottom?
      Q3 - Does anyone have a detailed photo of the shim order just in case it was assembled wrong. (mine is attached)
      I know most people on here are going to be horrified I'm taking back to stock but any help on above would be really appreciated.

    • By Bgringo
      I've read a lot of threads about this but still haven't found exactly what I'm looking for.  I'm pulling my 2004 DRZ400S out of storage sometime this week and getting it ready for the season.  I live at 9,000 ft, but my first ride of the year is probably going to be at around 5,000 ft.  I was going to pull the 145 main jet I'm running and put in the 150 adjusting the needle from the 2 clip to the 3rd, then re-jet once I got home.  I already have the extended fuel mixture screw in place so I started thinking that I should just run the 150 jet set up and adjust the fuel screw to compensate for the higher elevation where I'll be doing most of my riding.  I will be going down in elevation for rides until late May or June depending on snowfall, but riding on the street when I'm able.  Are there any disadvantages with this?
      I'm new to posting on this forum, so please forgive me if I didn't get the right search words in and there is already a post about this.
    • By Markl5557
      I am currently running 10w 40 Belray non synthetic and I want to switch to full synthetic amsoil .... is it ok to switch from regular to synthetic? I have read it’s not safe to go from synthetic to regular can someone explain if it’s safe to go from regular to synthetic!? Thanks !
    • By RockyMtnMark
      Good Morning,
        Last night I measured my valve clearances for the very first time (I know...) on my DRZ400S.  It's a 2002 and I've owned is since 2011.  I bought it with t's got about 15,000 miles on it and most of it's miles these days are on dirt.
      Intake specs are 0.10-0.20 mm.  Exhaust specs are 0.20-0.30
      My intake valve clearances are in spec, forgot to write them down.  My exhaust valve clearances are between 0.1778 and 0.2032 which is slightly out of spec.  They are no more than 25 microns out of spec.  My question is, do I really need to shim these?  Will this kind of out-of-spec cause performance, mechanical, or other losses?  As far as I can tell, I'd have to buy a whole shim kit which is like $80.  Thanks!
    • By Zach440
      Selling my 2009 Drz400sm. Been a great bike but it’s time to let go . Not looking for any trades - spring is just around the corner ! Located in northern Virginia . Cash only $4200- willing to negotiate I have some wolfman luggage options available as well. Love to make a package deal for someone 

      -11640 miles . Mild off-road never wrecked.
      -Oil / filter changed every 1500 miles
      -New did chain , brake pads , front sprocket at 10400 miles .
      - valves checked and within spec at 10,000
      - jetted with JD kit and 3x3 mod
      -doubletake mirrors
      -waterproof usb wired and located next to Speedo
      - drc large foot pegs , barkbusters with integrated turn signals . 12oclocklabs tall delete with upgraded circuit board
      -thumpertalk case savers
      -sergeant seat (amazing) and Clarke 3.9 tank (190mile range )
      - fog lights wired in so they shut off with high beams
      -Shorai lithium battery
      -led headlight

      - stock gas tank and seat will be included

      The bike is dirty in photos and I apologize my water is currently disabled outside due to freezing temps . Radiator guards and skid plate NOT included but can be for some extra $$. Rear tire could be replaced but front is fine .