I'm going to be re-valving a pair of forks and shock for my 2003 xr650r and wanted to see what was recommended for shim stacks. I am 235lbs with gear and have the .47kg fork springs and 11kg shock spring. I ride mostly rocky/woods terrain. I would like a plush ride for the small chatter but a setup that can also take on the big hits. I don't jump that much but would still like to be able to. I was thinking about drilling the fork compression valves out like Borynack recommends, and going with the lighter fluid. I guess i'm confused with all the different shim stack possiblities and if my spring rates will change what I need for shims. I would love to hear what kind of setups everyone has tried and what you all think of them.