Jump to content
Sign in to follow this  

Clutch Lever Mod.

Recommended Posts

I know there has been a lot of talk about modifying levers or getting Raptor levers. I just modified mine, lubed it with TriFlow and there is a world of difference in pull! Here are a few pics.

http://photos.yahoo.com/bc/escrowdog/lst?.dir=/Clutch+Lever&.view=t

I used a 21/64 bit to drill the large hole for the barrel, then like an 1/8" bit to elongate the cutout for the cable to slide through. Be sure to lube the cable AND the barrels on both ends of the cable, as well as the lever. I then moved the lever perch in on the bars more to get more leverage on the pull.

Best of all it's a free, easy mod.

Share this post


Link to post
Share on other sites

Come on, it can't be that hard can it? Just spend a little more time in the shower with your little friend and the clutch pull will be nothing.

P.S. you must use the left hand. :)

Share this post


Link to post
Share on other sites

The only problem is it takes a long time to get there via the shower method, especially if you're right handed :)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×