last nite i was trying to fit a hidden kill switch on my 06 wr450. there were 4 cables goin into the ignition switch behind the headlight so i opened it to see which cables to cut into. 2 wires were for the switch and 2 for the led to show the switch is on. i accidently touched a solder of the switch with a solder of the led with my circuit tester.i heard a pop and the led went out n when i push the starter nothing happens. however when the switch is on i can kick start it. i checked 2 fuses at the battery and theyre fine. please tell me i havnt cocked it up cus the bike is 2 weeks old.ne ideas neone?