I have an 07 WR450 and have been working on everything about this bike. Not long ago I set out to get the suspension dialed in and the first order of business was to get the sag(s) properly set which I did. Now that the shock sag is right (and by all appearances the fork sag seems correct) I went off to West Virgina to ride and test the bike. The forks are just terrible! They are anything but "plush". I know you're going to say to valve the thing and I am. But what I noticed was that the fork travel is just ragged, they are not smooth in their travel in any way. There are definite sticky areas and I can feel slight clunks in the travel. This was tested by holding the front brake and pushing down on the forks. Yesterday I went with a buddy to look for a new bike and I checked the suspension on a "new" '05 WR250, a "new' 06 WR250 and a new '07 WR450. They all felt the same way! Anyone else experience this? Are these forks that bad?