Garrett Berg memorial stickers

Don't forget to get your requests for the memorial decals to your rgional contact as soon as possible! See the memorial forum for your regional contact. No Cost To You, Just A Stamped Addressed Envelope! :)

Bill

mine gos in the a.m.!!! :)

Want to add this from the original post, Hey All lets get this done for Garrett

Here are the regional contacts to send self addressed, stamped envelopes to as arequest for decals. They should receive the decals from me by next Wednesday. Please be patient with this we are all volunteers that just want to help you honor Garrett.

New England:

Chris Stegemeier

P.O.Box 372

Rockland, DE 19732

Northeast, South of New York State, East to the Mississippi River:

Charlie Fisher

728 Warrington Ave.

Cinnamonson, N.J. 08077

Southeast:

Bill Barnard

3340 Schifko Road

Cantonment FL 32533

Houston Area Only:

Leah Bazzy

4162 Pine Crest Trail

Houston, TX 77059

Texas, Mid-west and Plains Areas

Shane Jones

444 E. Medical Center Blvd. #1616

Webster, TX 77598

Southwest, except California:

Yznvegas

9357 Red Rose Avenue

Las Vegas NV 89129

Northern California:

John Lorenz

c/o Garrett Berg

1201 Sequoia Court

Hollister, CA 95023

Southern California, including Hawaiian Islands:

Martin Sweet

7 Tradewinds Court

Chico, CA 95973

Northwest:

Cory Pollard

RT 1, Box 104

King Hill, ID 83633

Australia and Oceana:

Yamaha.Dude

P.O. Box 1642

Bundaberg QLD 4670

Australia

European International:

Peter Van Assche

Bosch 153

B-1780 Wemmel

Belgiium

If you are in doubt send your request to the coordinator nearest you, or to me in the east or to John Lorenz in the West. Canadian mambers, please use the closest contact to you area. To everyone that is helping I say a heartfelt thank you. To those that volunteered but I already had someone to cover your area, thank you. Feel free to offer your services to your regional contact. Last, please keep the requests at two decals for now. To MGR8 I canot say thank you enough for the design and Manufacture of these decals. God Bless Garrett, his family and friends and all of you at Thunper Talk (Steve and Bryan, especially)

Regards,

Bill Barnard

And order them Shirts too :)

Get your request to the nearest regional coordinator as soon as possible.

Bill

You can request stickers to give out at races, rides and events from your regional coordinator. shops wanting to hand out stickers can request too.

Thanks,

Bill

Be sure to request your memorial stickers and to order a t-shirt this weekend :)

Bill

After your weekend ride or race don't forget to request your memorial decals from your regional coordinators and to order a t-shirt too.

Bill

I hope everyone had a good, safe ride or race this weekend. After you clean your scoot please request a memorial sticker from your regional coordinators and order a t-shirt too.

Bill :)

To the top !

Bump

Please request a memorial sticker from your regional coordinators and order a t-shirt.

Bill

To the top of the forum.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Similar Content

    • By Markl5557
      Anyone’s air box smell like gas ? Is this normal ? Air filter is bone dry but it reeks in there .... I’m assuming cause of the carb being semi filled with gas ??
    • By Markl5557
      So I’m reading these horror stories of the stock vacume operated petcocks failing and letting gas into the oil .... how many of you guys switched over and is it worth it to switch to manual ?
    • By Markl5557
      Hey guys . I feel like I post here way to much lol 
       
      anyway after having my bike kn it’s side overnight to fix a cracked stator cover .... I come to find out that I also accidentally left the pet cock in the prime position .... constant gas flow to carb ... now my oil smells strongly of gas ... my question is ... was it the bike being on its side that made the gas get into the oil or the prime position on petcock that made this happen ? Or both ? I didn’t ride it much at all after discovering... I assume. I should drain the oil obviously but any other suggestions ? Always appreciated -mark 
    • By Praneeth143
      Hello guys , I have a suzuki drz400sm which is a 2009 model recently I purchased a rear sprocket which was a JT 41T , but I found that it did not fit to the rear sprocket hub of the bike and my drz has got the EXCEL TAKASAGO rims in it . How can I find one that fits and what sprocket brands and where can I buy it . I have attached pics of the current setup , please help me



    • By Surfman1
      Hello all, first time poster. Just bought this bike a few days ago it’s an 08 drz 400sm and am starting to notice it has a strange backfire at idle. I understand a little bit at decel might be normal, but at idle too?  It appears to have been jetted already, judging by the fact it has a jd jetting sticker on the bike itself. I know that it’s not an exact indicator it has but it could be. Has an FMF exhaust, it looks like a full system rather then a slip on but not entirely sure. A buddy recommended I mess with the air and fuel screw, haven’t done that yet. Just wanted to see if there was any other tips I should try.