Honda XR250R & XR400R Pictures

[yz250f_spud]

From a trip to colorado with some college buddies this summer. two xr's and a grizzly 700. probably should have rejetted but the 250 did fine until 12,500 ft or so.... then it was a little doggy to say the least.

[oldschoolimport]

me and the little one went riding. she ended up ditching the 50, and piled on the back of a friends 4 wheeler...

[Cheapo]

82 XR250R work in progress. lots of pull and it loves to be reved. AWESOME SITE

[themanoy]

my retro 1987 XLR250R tard

my franken tard 1988 XR250 wheelie machine

[mcnutty]

[danwill91]

http://www.youtube.com/watch?v=3DlX_tVatzc

A new clip of me on my XR250R dual exhaust.?

[sbsurfer]

[JacuR]

With and without silencer

[danwill91]

Had a very nice ride today and put together a cool vid.?

http://www.youtube.com/watch?v=K5U4782JkhU

[ky450]

my 2003 xr400 dual sport

[Shrk352]

Just picked this up, got it for a steal at $1600

01' XR400, Street legal.

What it looked like when I got it.

A couple weeks later. New(stock)tailight with brake light mod, LED turnsignals, Molded the licence plate to fit the curves of the fender. The guy gave me the red fenders with it so I put them back on, I think it looks better then the black. At least with the red tank on. Had most of the Gordan's mods done already. I ground down the header welds and added a uni filter.

[Torque-a-saurus]

Blast from the past...

My '82 XL250R I bought in 1989 when I was stationed at Fort Carson, CO. I would go riding almost every weekend up in the mountains... That photo is up near my top secret camp site overlooking Colorado Springs. That bike made me decide 2 things... 1) nothing beats cubic inches at high altitude, and 2) buy a bike with an adequate suspension! I used to put 20psi in the front forks trying to keep them from bottoming out on the jumps.

After I ETS'ed my brother 'did me a favor' by tearing the motor down to rebuild it, including using my charge card to buy all the parts... except he never put it back together! I got home and found 2 milk crates full of motor parts and a dismembered frame. RIP

[JohanChaves]

[JohanChaves]

[na-22-83]

Hello XR's,

Here I am again from Portugal.

This is the new look of my Bike.

I'm waiting for the CRF 450 front mud guard.

It will helps the air directly to the oil radiator.

José Silva

[na-22-83]

It's easy,

With 2 plastic lock straps.

You may see here:

In the Rims, I just put electric tape ( I dont know how do you call ).

I've tested in other Enduro bike and the tape continue glued.

Other pictures:

And this is me:

As you can see, I'm a very tall Pilot for a XR.

Don't worry, I fell very well on that bike.

My last bike before XR it was this:

José Silva

[minimotos95]

update pic of my dads

[MikeDeuce]

New to me, very standard '96 250L. Purchased on Friday and by Sunday it was missing the right side mirror and rear indicator was hanging on by a thread, owing to a rookie mistake on the trail (whoops)

[american dog]

This bike is still for sale $1900.00 or trade for a 2 stroke KTM or GasGas

Located in Central Ohio

[minimotos95]