Jetting basline needed ........... Taffy?

[sledge_57]

I need a place to start with jetting on my bike.

Bike is 2000 WR400 US model

No mods except 13t c/shaft sprocket

Alt. less than 1000ft

Probably going to do BK & Grey Wire when I start jetting.

I can't afford, at this time, to buy a bunch of different jets etc that I wont use so if anyone has a good baseline for a stone stock WR I'd greatly appreciate it.

Bob

[Taffy]

baseline jetting for what though sledge?

is it to keep the standard exhaust or to go YZ timing? just to improve standard jetting?

Taffy

[sledge_57]

Improve stock jetting, my wife isn't working at the moment so the only money I intend to spend is on jetting, will probably do grey wire and BK mod but nothing else for a while.

I'm generally pleased with the bike but I know the jetting could be a lot better than it is, even in stock form.

Bob

[Taffy]

sledge

i don't know much about the standard pipe and all that. you need a DRM needle with WR timing and also the PJ at 35 and the PAJ should be a 50.

order

DRM needle

35 PJ

50 PAJ

do the grey wire, BK mod, airbox lid off etc.

i'm HOPING this works for you.

Taffy