Jump to content
Sign in to follow this  

DRZ400E passenger pegs

Recommended Posts

I have a 2003 DRZ400E....I purchased a 2004 DRZ400S subframe and passenger pegs. I am sure this question has been answered but I:confused: cannot find the thread. What more will I need to do to swap out my E subframe for the S subframe? Will I need to purchase an S rear fender or will my E fender work? I have seen references that I will need to do some mods to the exhaust but I haven't seen specifics. Is it very difficult? I am sorry if this is a repeat question. Please help. Thank you.

Share this post


Link to post
Share on other sites

E fender will work with some minor adaptation, or you can buy a S fender since aftermarket plastics are cheap.

You will need to drill the lower threaded passenger peg mounting hole on the right side of the subframe.

The bolt will hold both the peg and the midpipe in place.

You will need to use a longer bolt but make sure it is not too long and dents your exhaust (happens with the Yosh Ti).

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×