Jump to content
Sign in to follow this  

instrument cluster

Recommended Posts

My cluster is on the blink, it's only displaying partial. Has anyone had any issues, 07 TE450

Share this post


Link to post
Share on other sites
My cluster is on the blink, it's only displaying partial. Has anyone had any issues, 07 TE450

Try disconnecting the battery and wait a few minutes then reconnect. That will reboot the system. Sometimes that helps.

Share this post


Link to post
Share on other sites

I have gone through three of these speedo's on my 06 TE450 & all have been replaced under warranty. I did pull one off the bike to find that it rattled inside, I pulled it apart to find that a component had come off the circuit board, it looked like a resistor, but because it was under warranty I put it back together & took it in to the dealer & they said it was a common problem that the speedo's were failing. I have had a similar problem in electronic displays before & have had to reclip the LCD screen back into position & they came good, I dont know if this helps but good luck.

Damo. :thumbsup:

Share this post


Link to post
Share on other sites

I had a problem with my instrument cluster on my 07 TE450. It had the same problem as you describe. I tried everything to get it working again. Finally I sent it back to the dealer (Heinins) and they replaced it right away. Great service form them.

Share this post


Link to post
Share on other sites

Thanks for all your info. I got a hold of the dealer and they ordered me a new unit under warranty.

Thanks Again John

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×