Jump to content
yzf426rider

will wrf426 crank and conrod fit my yzf 426?

Recommended Posts

In 2000 the WR400 and YZ426 crankshaft assy are listed as different P/N in the catalog.

In 2001 and 2002 they show the same P/N in both the WR and YZ, so those should be a direct swap.

Share this post


Link to post
Share on other sites

I have a 2000 yz426f and i am wondering will a 2001 wr426 crank and rod fit it without any other changes as far as counterbalance shaft and stuff

Share this post


Link to post
Share on other sites

The crank will fit, but you'll need the '01-'02 balancer drive gear. The later crank uses a spline for that gear, eliminating the problematic square key.

Share this post


Link to post
Share on other sites
On 8/9/2009 at 11:58 AM, grayracer513 said:

The crank will fit, but you'll need the '01-'02 balancer drive gear. The later crank uses a spline for that gear, eliminating the problematic square key.

what about the flywheel ? 2000 2001 have different part numbers but the stator is same part number ?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


×