Jump to content
Sign in to follow this  

Tail light MOD for 08 TE's

Recommended Posts

Does anybody else hate the way the license plate holder set-up hangs too far down? Well, I do and trimmed off a little more than 2 1/4"s. I redrilled some holes to move the license plate as high as it will go. I should have taken before and after pics, but here is the after shot.

David

TaillightMOD.jpg

Share this post


Link to post
Share on other sites

I went a little further on my '08 TE610:

BDtaillight.jpg

:confused:

Share this post


Link to post
Share on other sites

I too used the Baja Designs taillight with a dab of RTV behind the plate to keep it from vibrating and fatigue cracking. It has very bright LED's and 4 white ones to light the plate. There is probably some law against altering a plates shape, but this is Idaho.:confused:

taillight6.jpg

Share this post


Link to post
Share on other sites
I too used the Baja Designs taillight with a dab of RTV behind the plate to keep it from vibrating and fatigue cracking. It has very bright LED's and 4 white ones to light the plate. There is probably some law against altering a plates shape, but this is Idaho.:excuseme:

taillight6.jpg

Your pipe looks a bit black !!:confused:

Share this post


Link to post
Share on other sites

The Sicass light is actually a DRC edge II light.

One of the best places to buy one is Wheeling Cycle. Ask for Forrest.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×