Jump to content
Sign in to follow this  

back bleeding magura clutch

Recommended Posts

Im tring to back bleed the clutch on my 200. But I cant force the fluid in. Yes the top cover is off and I have the bleeder valve cracked. WHat do you thing is wrong? thx

Share this post


Link to post
Share on other sites

I had the same problem. Check to make sure your lever adjustment is backed out. If it is in too far the master cylinder piston can be blocking off the resevoir not letting fluid in.

Share this post


Link to post
Share on other sites

Make sure the bleeder valve isn't clogged with dirt. You may have to take it all the way out to check it.

Share this post


Link to post
Share on other sites

Mine did the same thing. Took a rebuild kit to fix it. Either the spring was sprung, or the o rings swelled just enough to drag and not let the piston go back to the home position.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×