Jump to content
Sign in to follow this  

Ufo Plastics. Good Quality Or Not?

Recommended Posts

what are your experiences with ufo plastics. do they last long or not, do they scratch easily. i just bought a set of black for my 250 and they look like low quality.

Share this post


Link to post
Share on other sites

UFO is good, i havent had acerbis yet but i can tell you UFO is a lot better than polisport! black will look old easily, regardless of the brand of plastic.

Share this post


Link to post
Share on other sites

and changes colour within the first half hour. my friend has a headplate and shrouds that are polisport. not only are they way different than the oem colour blue, they are way different from each other!

Share this post


Link to post
Share on other sites

I'm not crazy about UFO. The edges on their plastic, especially fenders is always sharp which you will notice if you ever have to pick your bike up at the rear fender. Color match can be a little off as well. On one of my Kawi's, I replaced a rear fender with UFO & color was a little off. Also, on a ktm color was a little off. I think acerbis is the way to go. They make plastic for most of the O.E.'s. Just my .02

Share this post


Link to post
Share on other sites

I never liked the looks of UFO myself. They look cheap to me. I have not used it, so I don't have "use" experience on the stuff, could never get myself to buy it. I did get a set of acerbis for my 450 and everything fit perfect and looked like the oem stuff. Very happy with that stuff.

Remeber, it is plastic that is meant to bend and twist, so it will scratch easily. The black is going to show every little scratch and will most likely look like crap quickly, especialy if you use it.

Share this post


Link to post
Share on other sites

I hate UFO, dis-colored & spider cracking and I never rode the machine I had it on...I have found Cycra to be the best and I stick by them.

Share this post


Link to post
Share on other sites
UFO plastics are the best. They are really thick, and bend rather then crack. They also are indentical to stock. I have had acerbis and they crack easily.

this is another never ending debate...ive tried all brands, now I run CYCRA, they have a bunch of new tricked out plastice option this year.

Share this post


Link to post
Share on other sites

1. OEM

2. UFO

3. Acerbis

(No experience with Cycra yet)

I had Acerbis side panels that wouldn't fit without really prying around on the airbox, and once in place, they made the airbox stick out funny, and had a large gap at the seam.

UFO stuff fits great and seems to be durable enough. I have seen UFO plastic with a small, random light spot here or there, but no big deal.

OEM is definitely the best, but is pricey.

Check out my 250 in my "Garage". Those are UFO plastics (the rear fender and front number plate are OEM), with TJ graphics. It came out pretty nice.

Share this post


Link to post
Share on other sites
UFO plastics are the best. They are really thick, and bend rather then crack. They also are indentical to stock. I have had acerbis and they crack easily.

that is true thought.... i have used acerbis plastics, they always seem to break.

Share this post


Link to post
Share on other sites

The last UFO's I got took on spider cracks and I barely used the bike

Share this post


Link to post
Share on other sites

i got a UFO back fender last year (old one broke off) and so far its been good. Someone said the edges are sharp, just use some high grit sand paper and rub it, not so sharp now :)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

  • Similar Content

    • By Kadensmith44
      I’m wanting to powder coat my bike but it’s all new to me. I’ve got a powder coater picked out that I’ve heard is good for what I’m doing. I’m not 100% what kind of sand blaster I need and what kind of media. I have also heard you can’t cook in the oven after you’ve baked your parts is that true?
    • By luke8500
      Hi all, 
      I have a 2004 honda crf250r and it wont start hot at all. The motor was just rebuilt with a new cylinder and piston. The valves were just adjusted. It will start cold in 1 or 2 kicks with choke but as soon as it gets hot it wont start. If you bump start it the motor will just turn over without starting.  sometimes it will start. It runs great until you shut it off.  im thinking its either a fuel issue or an electrical issue. Any help would be greatly appreciated. 
    • By SandSoldier
      Hello! This listing is for my 2007 Honda CRF250R dirt bike. Last winter I spun the rod bearing and just recently finished rebuilding it. Selling to fund new bike. I am currently the second owner.

      Current registration valid until 2020, pink slip in hand.

      Fresh parts:
      -top end kit: Wiseco; forged, moly skirt coated, 12.9:1 comp ratio (new wrist pin, gaskets, etc)
      -cylinder: new OEM
      -bottom end kit: Wiseco; (new bearings, seals, etc)
      -oil pump: new OEM
      -head studs & nuts: new OEM

      -fresh oil and filter
      -all tolerances checked in top end
      -valves adjusted
      -carb adjusted

      Note:
      *rebuild was done by my dad (master tech at CAT) and I (4th year mechanical engineering student)
      *has maybe 15 minutes on new parts, IT HAS NOT BEEN PROPERLY BROKEN IN YET
      *I have email receipts, pics of rebuild, and old parts as proof of rebuild, just ask and I'll show em off

      Other parts:
      -90% tread on front and rear tires
      -excell takasago front wheel
      -custom aluminum skid plate
      -wrap around hand guards
      -spark arrestor
      -kickstand

      Feel free to ask for any more specifics or pictures!

      LOCAL PICK UP ONLY

      Thanks!
    • By Matt Ray
      Okay so the title is a little vague. 
      So it was having trouble idling and even starting when I first bought it about a month ago for $2k. 
      So I did a rough clean of carb, looked up on YouTube, Forums, Etc on how to do it. I only cleaned jets with carb cleaner and sprayed around the float bowl area and such, so not too extensive.
      Did that and I took it out to a park, It would start up right away mostly, few kicks sometimes, but when I got it started, I had to keep the choke on. Right when I was ready to go fast and go up to 3rd and 4th gear I'd switch it off and it would work fine and sound fine and everything, but when I slowed back down and coasted around 1st gear i'd pop it back out again because it sounded like it was going to do. I have some videos if people would like me to link to them.
       
      So after that I decided to take it apart and replace spark plug with OEM NGK R0409B-8, replace main jet from a old 170 to a new 170, replaced pilot jet from a old 40 to a new 42, and kept starter jet the same just made sure that wasn't clogged, ordered a new adjustable fuel screw and used that.
      and it was still having a little bit of problems! I just started up today and the day before today. It would run only with choke on, if i twisted throttle in neutral it sounded pretty good, no gun shot noises or anything, pretty smooth. 
      If I tried to take choke off it would die immediately. So I started it back up again, took around 6 kicks.. So again with choke on it sounded like it was starting to lose power and RPM's would drop so I'd twist throttle a few times and it would stay idling.. then after a small amount of time, start to sound like its about to die again... so I would rev it up again, and repeat..
       
      Fuel line isn't clogged, flows fine.
      I tried fuel screw everywhere between 1 and 2 turns out..
      I checked valve clearances, and I'm no expert but from the videos I watched the slipped underneath intake and exhaust with only minor force.
      So I'm lost.. 
      Maybe float bowl is messed up? Should I just do a COMPLETE carb rebuild from videos I've seen on youtube, like this one -> https://www.youtube.com/watch?v=3AXb9UprT30? Or what? 
       
      It's getting annoying taking it apart all the time, I jsut want it to start up quickly and run well!!
       
      Thank you!
       
      Austin, TX, Elevation 600ft, where I ride its around 900ft
       
       
    • By Bryan Bosch
      WASHINGTON, D.C. – August 16, 2018 – (Motor Sports Newswire) –

       
      Honda Recall Summary:
      Name of product: CRF250R Off-Road Motorcycles Hazard: The clutch outer can break, posing crash and injury hazards. Remedy: Repair Recall date: August 16, 2018 Units: About 3,200
      Consumer Contact: American Honda toll-free at 866-784-1870 from 8:30 a.m. to 4:30 p.m. PT Monday through Friday or online at http://powersports.honda.com/ and click on “Recall Information” at the bottom of the page for more information.
      Honda Recall Details:
      Description: This recall involves all 2018 Model Year CRF250R off-road motorcycles. The recalled motorcycles were sold in a red color. The names “HONDA” and “CRF250R” are printed on the sides of the motorcycle. The model name and model year are printed on a name plate label located at the front right top of the frame, near the steering head.
      Remedy: Consumers should immediately stop using the recalled off-road motorcycles and contact their local authorized Honda Powersports dealer to schedule an appointment for a free repair. Honda is contacting all known purchasers directly.
      Incidents/Injuries: American Honda has received 19 reports of clutch failure, including two that led to engine lock up. No crashes or injuries reported.
      Sold At: Authorized Honda Powersports dealers nationwide from November 2017 through July 2018 for about $8,000.
      Manufacturer(s): American Honda Motor Company Inc., of Torrance, Calif. Manufactured In: Japan Recall number: 18-759 This recall was conducted, voluntarily by the company, under CPSC’s Fast Track Recall process. Fast Track recalls are initiated by firms, who commit to work with CPSC to quickly announce the recall and remedy to protect consumers.
      The U.S. Consumer Product Safety Commission is charged with protecting the public from unreasonable risks of injury or death associated with the use of thousands of types of consumer products under the agency’s jurisdiction. Deaths, injuries, and property damage from consumer product incidents cost the nation more than $1 trillion annually. CPSC is committed to protecting consumers and families from products that pose a fire, electrical, chemical or mechanical hazard. CPSC’s work to help ensure the safety of consumer products – such as toys, cribs, power tools, cigarette lighters and household chemicals -– contributed to a decline in the rate of deaths and injuries associated with consumer products over the past 40 years.
      Federal law bars any person from selling products subject to a publicly-announced voluntary recall by a manufacturer or a mandatory recall ordered by the Commission.
      Source: Consumer Product Safety Commission

×