Jump to content
Sign in to follow this  

FRAYED CABLE

Recommended Posts

anyone on the yz 4-strokes had any problems with the throttle cable fraying on my father 1998 yz 400 hes on his third cable whats the deal? i work at a dealership and evan the never bikes are haveing the problem appearently are there any fixes for it or a better cable?

Share this post


Link to post
Share on other sites

i just did a check under my throtle linkage bok on my carb and my cable is frayed. so i have to order a new one. I know these things are tricky to put on but how tricky

Share this post


Link to post
Share on other sites

Had the same issue on my 99 after 3000 miles.... I checked them after reading about it here and sure enough they were hanging by two strands.

The design calls for close maintenance and lubrication.(poor design at that)Easy to R&R though..you should not have a problem. :)

Share this post


Link to post
Share on other sites

This is a known problem on these bikes. It is poor design. I'm on my third cable and I've tried adjusting that thing all over the place. Nothing seems to help.

Share this post


Link to post
Share on other sites

I too am in the process of replacing my cable.

It broke on the push side about an inch and a half

from the bottom. I thought mabe their was too much play in the wheel on the carb. Can that wheel be ajusted? Is this where they all break?

Share this post


Link to post
Share on other sites

I too am in the process of replacing my cable.

It broke on the push side about an inch and a half

from the bottom. I thought mabe their was too much play in the wheel on the carb. Can that wheel be ajusted? Is this where they all break?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×