Specs for a XR650L rear sprocket?

[Purcell69]

Does anyone have or know where I can find the specs on a XR650L rear sprocket? I am looking for the bore diameter and the spread for the bolt holes center to center, preferably in mm. I have a lead on a steel 42 tooth to use for all the highway riding I do. The price is good, but it is in Australia. I could pull my rear wheel and take measurements, but I figured someone here might have them on-hand.

-Joe

[RipperFox]

Joe, give me until tonight, and I will mic out the old stock one. If you would have posted 5 mins earlier, I was still home and could have brought it to work and had it for you.? Oh well.

Knee update...torn MCL...three places...fortunately it is the ligament that doesnt require surgery to heal. Just limt use.

[infsqdldr]

http://www.jtsprockets.com/52.0.html?&L=0&sel_uid=4276&p=

[asf]

Does anyone have or know where I can find the specs on a XR650L rear sprocket? I am looking for the bore diameter and the spread for the bolt holes center to center, preferably in mm. I have a lead on a steel 42 tooth to use for all the highway riding I do. The price is good, but it is in Australia. I could pull my rear wheel and take measurements, but I figured someone here might have them on-hand.

-Joe

I need a new 42, if there is more than one could you share the resource?

Thanks!

[XR650L_Dave]

Huffa2 found a 42, I think.

Dave

[asf]

Just FYI in case anyone is looking, I have a 40 from sprocket specialists. They will make any size you want even if it isn't listed, but they are aluminum. They also take a few weeks to make one from scratch. It's always nice to know options if I need to order something "yesterday"

40 is way too tall even with 17's for my riding tastes. I tried putting on a 13t but the retainer clips the end of my chain? It is from rockymountain.

[Purcell69]

Huffa2 found a 42, I think.

Dave

Huffa's running aluminum, but has not had any wear or fishhook issues. I just picked up a 44 in aluminum on ebay for $18.00 so I thought I'd give it a try, but I still like the idea of the 42 in steel even better. I found the seller on ebay, but the listing expired. There was more than one, so if it is a correct fit, I'll pass along the seller information, ASF.

-Joe

[Purcell69]

http://www.jtsprockets.com/52.0.html?&L=0&sel_uid=4276&p=

Thanks for the link! Those are the same specs she quoted me. ASF, as soon as I get back in contact with the seller, I'll PM the info to you.

-Joe