Jump to content
Sign in to follow this  

Am I Screwed??

Recommended Posts

sorry ive been posting alot but.. im putting a new head gasket it my 06' and I took the head off. Me being a dumbass forgot to take the spark plug out, and loosened some of the bolts holding the head on cylinder first. They came out without any problem. But my question is is, could i have warped the head?? Could the compression in there do that? Both intake and exhaust valves were closed. I just remember hearing something about warping the head when tightening it down, but what about taking it off?

Share this post


Link to post
Share on other sites

You did nothing bad to the motor, the warping issues that people run into are when somone tightens down the bolts unevenly, or if you remove the head while the motor is still hot and you let it cool down too fast.:thumbsup:

Share this post


Link to post
Share on other sites
Huskaroo You did nothing bad to the motor, the warping issues that people run into are when somone tightens down the bolts unevenly, or if you remove the head while the motor is still hot and you let it cool down too fast.

yessir!:thumbsup:

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×