Jump to content
Sign in to follow this  

Urgent Help Needed

Recommended Posts

This is not really jetting but i did not know where to put it but my clutch is slipping and I heard that you can put washers on the clutch springs to help fix the problem. Will that work or what do you suggest to get my bike going?

Share this post


Link to post
Share on other sites

I would suggest putting the post into the bike specific forum or the general forum. You will get a better response. If your clutch is slipping you can first make sure the slack on the clutch cable is adjusted right, it needs to fully disengage. If that is OK you probably need new clutch plates and or springs. The clutch is more than likely slipping because it is worn out. I have heard that in a pinch you can take the steel plates out and rough them up with sand paper clean them and that will give you a little more clutch life.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×